Standards & Publications
Engineering Standards
ANSI J-STD-001B Requirements for Soldered Electrical and Electronic Assemblies
ANSI N2.1:1989 Radiation Symbol
ANSI/NCSL Z540-1 Calibration -- Calibration Laboratories and Measuring and Test Equipment, General Requirements (1994)
ANSI Z535.1-1998 Safety Color Code
IEEE C95.1-1995 Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Field, 3 kHz to 300 GHz
-----
ASTMD295-94 Standard Test Methods for Varnished Cotton Fabrics Used for Electrical
Insulation
ASTM B766-86 Standard Specification for Electrodeposited Coatings of Cadmium
ASTM D1868 Standard Test Method for Detection and Measurement of Partial
Discharge (Corona) Pulses in Evaluation of Insulation Systems
ASTM D3951-98 Standard Practices for Commercial Packaging
ASTM D3955-99 Standard Specification for Electrical Insulating Varnishes
-----
EIA-310-D Cabinets, Racks, Panels, and Associated Equipment
-----
IEC 61000-3-2 Electromagnetic compatibility (EMC)
-----
IEEE 100-1996 The New IEEE Standard Dictionary of Electrical and Electronics Terms
IEEE 141-1993 Recommended Practice for Electric Power Distribution for Industrial
Plants (Red Book)
IEEE 200-1975 IEEE Standard Reference Designations for Electrical and Electronics Parts
and Equipment (R1989)
IEEE 519-1993 Harmonic Control and Reactive Compensation of Static Power
Converters, Guide for
IEEE C62.41-1991 Surge Voltages in Low-Voltage AC Power Circuits, Recommended
Practice for
IEEE C62.45-1992 IEEE Guide on Surge Testing for Equipment Connected to Low-Voltage
AC Power Circuits
IEEE 1100-1999 Recommended Practice for Powering and Grounding Sensitive Electronic
Equipment.
-----
ANSI/IPC-A-610 Acceptability of Electronic Assemblies
IPC-CM-770 Guidelines for Printed Board Component Mounting
ANSI/IPC-CM-700 Component Packaging and Interconnecting with Emphasis on Surface
Mounting
ANSI/IPC CC-830B Electrical Insulating Compound for Printing Wiring Assemblies,
Qualifications and Performance of -1984 (R1990)
ANSI/NEMA C18.1 Dry Cell Batteries – Specification
ANSI/NEMA C18.2 Rechargeable NiCad Batteries
ANSI/UL 1236-86 Batteries Chargers
-----
NFPA 70 rev 2 National Electrical Code
-----
UL62 rev 97 Flexible Cord and Fixture Wire
UL489 rev 2 Molded-Case Circuit Breakers, Molded-Case Switches, and Circuit-
Breaker Enclosures
UL943-93 Ground-Fault Circuit Interrupters
UL 1418-92 Cathode-Ray Tubes
UL 1449-96 Transient Voltage Surge Suppressors
UL 1950 rev 95 Safety of Information Technology Equipment Including Electrical
Business Equipment
-----
MIL-HDBK-251 Reliability/Design Thermal Applications
MIL-STD-129P Marking for Shipment and Storage
MIL-STD-461E Requirements for the Control of Electromagnetic Interference
Characteristics of Subsystems and Equipment
MIL-STD-810F DOD Test Method Standard for Environmental Engineering
Considerations and Laboratory Tests
MIL-STD-889B(3) Dissimilar Metals
MIL-STD-2073-1D DOD Materiel, Procedures for Development and Application of Packaging
Requirements
MIL-T-152B(2) Treatment, Moisture and Fungus-Resistant of Communications, Electronic
and Associated Electrical Equipment
-----
FAA-STD-001B-76 Color and Texture of Finishes for National Airspace System (NAS)
Equipment
FAA-STD-019D Lightning Protection, Grounding, Bonding and Shielding Requirements
for Facilities
FAA-STD-020B-92 Transient Protection, Grounding, Bonding and Shielding Requirements for
Equipment
FAA-STD-032-96 Design Standards for National Airspace System (NAS) Physical Facilities
FAA-STD-049-94 Fiber Optics Standard for Telecommunications Systems and Equipment
FAA-C-1217F Electrical Work, Interior
FAA-D-2494B Instruction Book Manuscript Technical: Equipment and Systems
-----
A-A-1419D Filter Element, Air Conditioning (Viscous-Impingement and Dry Types,
Replaceable)
W-C-596/12E Connector, Receptacle, Electrical, General Purpose, Duplex, Hospital
Grade Grounding, 2 Pole, 3 wire, 15 Amperes, 125 Volts, 50/60 Hertz
W-C-596/13C Connector, Plug, Electrical, General Purpose, Hospital Grade Grounding,
2 Pole, 3 Wire, 15 Amperes, 125 Volts, 50/60 Hertz
This is a general index of Electrical Engineering Standards and Specifications. Many Engineering Standard Bodies are listed above, and links to specifications. If you don't see the Standard your looking for, try Bus Interfaces, on the Electronic Bus Standards page. Use the icon at the top of the page to search for Electrical Engineering Standard Organizations. Many Engineering Standard Bodies are listed on the Standard Organizations page, and links to specifications. I've also included some Technical Committees, and European groups. Of course the major DOD and military groups are listed as well. But to get a better listing of Trade Associations and Consortiums, you should go to the Bus Design page that best relates to that information ~ as there are many different Trade Associations.
|
|||||||
| Home | |||||||
|
|
|||||||
|
|
|
|
|
|
|
|
| Distributors | Components | Equipment | Software | Standards | Buses | Design | Reference |