Style and Types of MIL5015 Connectors
Mechanical Components Manufacturers

MIL-5015 Military Connectors

A listing of MIL-C-5015 Connector Manufacturers which produce connectors based on Military specifications.
The products [listed as Military specification document numbers] the companies produce are listed under the company name which are indexed in alphabetic order.

MIL-DTL-5015H - Connectors, Electrical, Circular, Threaded, AN Type General Specification

Main Military Connector manufacturers [Vendors providing other DOD style connectors]
Military Connector Specifications [Listing of the different DOD connector specifications]

Amphenol Corp. {MIL-C-5015 Series III, Military part numbers MS3450 through MS3459}

Array Connector Corp. {MS5015; MS3101F, MS3102A/R, MS3106A/R, MS3108A/R}

Conxall Corp. {Contact threaded MIL-C-5015 type plastic Power connectors}

Hirose Electronic {US Army MIL-C-5015 Connectors, No of Positions 2, 3, 4, 6, 7, 8, 17, 19, Shell Size 10, 18, 20, 22 & 24}

ITT Cannon {MIL-DTL-5015, Threaded coupling, 13-150 amperes, 1-100 contacts}

The shell size is a number given to indicate the physical size of the connector.
The number of positions is of course the number of pins or sockets held in the connector.
The common style is a threaded twist-on coupling, the less common style uses a compression fitting for quick disconnect.
Although a Bayonet Fitting is also considered a quick disconnect, but requires a twisting motion to disengage the connectors.

MIL-C-5015 connectors use a threaded coupling except for quick disconnect MS3107 and MS3507 types.
Responsibility for MIL-DTL-5015 was passed to the SAE in 2000, as SAE-AS50151.
Each of the individual MS part numbers or specification sheets now have SAE document numbers [a one for one transfer].
So MIL-DTL-5015 has been cancelled without replacement, superseded by SAE-AS50151 [different agency, same connector].
This fact hasn't stopped any manufacturer from claiming MIL-DTL-5015 compliance, or updating a catalog to indicate the SAE spec.

Listing of M12 Industrial Connector manufacturers
Listing of Industrial Ethernet Connector Manufacturers

Additional Connector types; Connector Manufacturers

This is a Military 5015 Connector Manufacturers list page. This page list connectors which adhere to the Military specification MIL-C-5015.
The products the companies produced are listed under the company name which are indexed in alphabetic order.

Male MIL-DTL-5015 Connector

MIL-5015 Documentation Note;
MIL-DTL-5015 is a specification that covers connectors with both military and commercial applications. Revision H to this document is a maintenance action, prior to conversion of the document to a non-government standard [version 'H', May 2000, was the last up-date].
These connectors are rated for operation within a temperature range of -55C (-67F) to either 125C (257F), 175C (347F), or 200C (392F) depending upon the class. The upper temperature is the maximum internal hot spot temperature resulting from any combination of electrical load and ambient conditions.

MIL-STD-1651 - Insert Arrangements for Electrical Connectors; MIL-C-5015, & MIL-C-22992 (Classes C, J, and R), and MIL-C-83723 (Series II).

Larry's Web Page

Electronic Parts and Equipment Distributors Electronic Component Manufacturers OEM Electronic Equipment Manufacturers EDA Software Producers CAD/CAE Software Engineering Standards, EE Publications Interface/Embedded Computer Bus Electronic Engineering Design Data Engineering Reference Information.
DistributorsComponents Equipment Software Standards Buses Design Reference

Modified 6/13/15
© 1998 - 2016 All rights reserved Larry Davis