Connector Manufacturers

Hardware
Mechanical Components

MIL-DTL-32139 Part Number Table



[Main Connector Page]
[Home]

Google
 

A listing of MIL-DTL-32139 D-Subminiature Connector Manufacturers.
The products the companies produced are listed under the company name which are indexed in alphabetic order.


MIL-D Sub Connector Manufacturers [Sub-miniature]

MIL32139 Connector part number table
Decoding MIL-32139 Connector Part Numbers

Part Number Decode

M32139/ then use the call outs in the figure above to determine the connector type.
The M32139/ section of the part number is constant and will always be used.

Insert Arrangements, pin numbering scheme for a 9-pin, 15-pin, 21-pin, 25-pin, 31-pin, 37-pin and 51-pin cavity.
Back to the main MIL-DTL-32139 Connectors page

{Back to Connector Manufacturers Index}


D-Sub Connector types: all shell sizes

Board Mount D-Sub Connectors:
...Right Angle D-Sub Connector
......Through-Hole D-Sub Connector
......Surface Mount D-Sub Connector SMT
......Dual Port Two connectors stacked together
...Straight D-Sub Connector: Solder
......Press-fit D-Sub Connector: Solderless
......Wire Wrap D-Sub Connector: Solderless
Cable D-Sub Connectors:
...IDC D-Sub Connector; Discrete Wire
...IDC D-Sub Connector; Flat Ribbon Cable
...Crimp Snap-in D-Sub Connector; Discrete Wire
...Solder Cup D-Sub Connector; Discrete Wire

DSub Terms:

HD: High Density
Filtered: Suppress electro-magnetic interference (EMI) or radio frequency (RFI)
High Density, HD: Pack 3 rows of pins into the next smaller 2-row shell size, 15-pins into a 9 pin shell size
IDC: Insulation Displacement Connection
IEC: (International Electrotechnical Commission) ~ International Standards Body
MIL: Military, as in Department of Defense Standard 'DOD'
MIL-C-24308/20A: Connectors, Electrical, Rectangular, Miniature, Polarized Shell, Rack and Reel, Shield, Straight, Deep
MIL-DTL-24308; A sub-standard of MIL-C-24308. DTL stands for Detail Specification Sheet
RoHS: Restriction of Hazardous Substances
SMT: Surface Mount Technology
THR: Thru Hole Reflow, 'Pin in Paste'

Refer to the following page for Military Connectors Manufacturers.
This is a listing of Military Connector data. The products the companies produce are listed under the company name.

Engineering Key Words: Dsub, D-sub, D-Subminiature, Connector, Military, Rectangular, Coaxial,
Manufacturers, 9-pin, 15-pin, 25-pin, Filtered, Vendors, miniature, mini-D, miniature D.


Leroy's Web Page
Home

Electronic Parts and Equipment Distributors
Electronic Component Manufacturers
OEM Electronic Equipment Manufacturers
EDA Software Producers CAD/CAE Software
Engineering Standards, Book Stores, and Publications
Interface/Embedded Computer Bus
Electronic Engineering Design Data
Engineering Reference Information.
Distributors
Components
Equipment
Software
Standards
Buses
Design
Reference

Last Modified 11/11/09
Copyright © 1998 - 2010 All rights reserved Leroy Davis