Hardware
Mechanical Components
Military MIL-DTL-32139 Connector Manufacturers
[Commercial D sub]
[Mil-83513 Connectors]
[Mil-24308 Connectors]
[Military Connectors]
[Military Connector
Specifications]
A listing of MIL-DTL-32139 Nanominiature Connector Manufacturers.
The products the companies produced are listed under the company name
which are indexed in alphabetic order.
There don't seem to be many companies offering MIL32139 parts.
However the connector shell sizes are provided along with any companies, as their found.
MIL-DTL-32139: Nanominiature, Polarized Shell, Rectangular Electrical Connectors
The specification represents a style, but both board mounted and cable terminated connectors are covered.
MIL-DTL-32139 connectors may have a single row or double row of contacts.
The connectors are polarized because the shell is non symmetrical, only fits with its mate one way.
Insert Arrangement | A | B | C |
9 | .500 | .395 | .284 |
15 | .650 | .545 | .434 |
21 | .800 | .695 | .584 |
25 | .900 | .795 | .684 |
31 | 1.050 | .945 | .834 |
37 | 1.200 | 1.095 | .984 |
51 | 1.550 | 1.445 | 1.334 |
The table refers to a single row connector, the double row shell size is shown below.
Note; these Nano-connector would be preferred over a normal D-sub connector.
Glenair {MIL-DTL-32139 board and cable, straight or right angle}
Insert Arrangements for MIL-DTL-32139 Connectors
Part Number Table for MIL-DTL-32139 Connectors
Insert Arrangement | A | B | C |
9 | .375 | .270 | .160 |
15 | .450 | .345 | .235 |
21 | .525 | .420 | .310 |
25 | .575 | .470 | .360 |
31 | .650 | .545 | .435 |
37 | .725 | .620 | .510 |
51 | .900 | .795 | .685 |
Board Mount D-Sub Connectors:
...Right Angle not covered in this standard.
......Through-Hole Vertical Connectors covered in slash sheet 5 and 6
......Surface Mount not covered in this standard.
......Dual Port Stacked connectors not covered in this standard.
...Straight D-Sub Connector: Solder
......Press-fit not covered in this standard.
......Wire Wrap not covered in this standard.
Cable D-Sub Connectors:
...IDC Flat Ribbon Cable not covered in this standard.
...Crimp Type Discrete Wire, largest wire size is 30AWG.
...Solder Cup not covered in this standard.
Refer to the following page for Military Connectors Manufacturers.
This is a listing of Military D-Sub Connector Manufacturers and data.
The products the companies produce are listed under the company name which is indexed in alphabetic order.
Site Navigation:
Engineering Index > Engineering Components > Mechanical Components > Connector Vendors > Military Connector Vendors > MIL-DTL-32139 Vendors
Home | |||||||
Distributors | Components | Equipment | Software | Standards | Buses | Design | Reference |