Mechanical Components

Industrial Battery Manufacturers

[Electronics Batteries] [Industrial Batteries]

A listing of Industrial Battery Manufacturers and Related sites, listed in alphabetic order, with Component links

UPS vendors; UPS Manufacturers

Battery Manufacturers [Primarily vehicle batteries]

ABSL Power Solutions {Marine Batteries}

Crown Battery {Industrial Batteries, Automotive, Marine, Utility, Railroad, Lift Truck}

Douglas Battery Manufacturing Company {Motive Power, Sealed Lead Acid Battery Manufacturer}

East Penn Manufacturing {Lead-acid batteries}

EnerSys {Battery Manufacturer}

Exide {Auto Battery Manufacturer}

GNB Industrial Power, see Exide
{Network Power and Motive Power markets, Industrial Lift Trucks, Railroad Equipment, Maintenance Lifts}

Hitachi Maxwell {Industrial Lithium Batteries}

Oerlikon Stationary Batteries {VRLA/AGM stationary batteries}

Optima Batteries {Auto, Marine, Commercial Battery Manufacturer}

Rolls Battery Engineering {lead-acid battery Manufacturer}

Superior Battery Manufacturing Co., Inc. {Automotive, Marine, Commercial Batteries}

Toshiba {Developing Direct Methanol Fuel Cell (DMFC) products}

U.S. Battery Manufacturing Company {Premium grade, deep cycle batteries, 12 volt Military Ordinance}

{Consumer Batteries, Micro-Batteries, Automotive Batteries}

Car Battery Terminal
Battery Terminal Clamp

Battery Information:

Batteries should be stored in a cool, dry, well-ventilated area with an optimal storage temperature range of 0°C to 25°C.
Excessive high temperature can damage a battery.

There are two general types of batteries; Wet or Dry cells.
Wet cell batteries use a liquid electrolyte while Dry cell batteries use a paste electrolyte.
A Lead-Acid Battery is a rechargeable battery that uses lead plates as the terminals and acid as the electrolyte.
A Carbon-Zinc [Dry] cell uses a carbon positive rod and a negative zinc case.
The Alkaline cell uses zinc as the negative electrode and manganese dioxide as the positive electrode, with an alkaline electrolyte.
The Nickel-Cadmium cell uses nickel hydroxide [negative terminal] and cadmium hydroxide [positive terminal] and potassium hydroxide as the electrolyte.
The Lithium Battery uses lithium metal or a lithium aluminum alloy in its negative electrode and manganese dioxide in its positive electrode.
The Lithium-ion Battery uses lithium metallic oxide in its positive electrode and carbon material in its negative electrode.

The positive terminal is the Cathode, and the negative electrode is the Anode.

A listing of Industrial Battery manufacturers. Batteries not normally found in electronic gear.
The types Batteries the company makes is listed next to the company name.
All other electronic component manufacturers may be found by selecting the Components icon below, or use the Equipment icon.

PC motherboard

Distributor rolodex Electronic Components Electronic Equipment EDA CDROM Software Engineering Standards, BOB card Cabled Computer Bus Electronic Engineering Design Table Conversion DB9-to-DB25.
DistributorsComponents Equipment Software Standards Buses Design Reference

Modified 6/13/15
Copyright © 1998 - 2016 All rights reserved Larry Davis