Hardware
OEM Equipment
[VME Boards] [VPX boards] [VXS boards]
[VME Chassis and
Cases]
[VME BackPlanes]
[VMEbus Design Page]
[Other Board types]
[Home]
VPX is defined by VITA46. VPX boards may still follows the IEEE 1101 for board size but use different connectors.
However a VPX board may also use the REDI standard [VITA 48] for a mechanical form factor.
VPX cards may be either 3U or 6U high and 160mm deep. The new VPX connector runs up to 6.26Gbps
The VPX board style defines a new direction for the VME bus standard and is not backward compatible with the VME specification.
However, manufacturers do produce backplanes that handle both VME and VPX cards.
Notice how each signal pair also has two individual ground signals, and that every other pair swaps lanes.
So a pairs of signals is only placed next to ground pins in both the rows and columns.
Row A | Row B | Row C | Row D | Row E | Row F | Row G | Row H | Row I | ||
1 | A | PA-RX3+ | PA-RX3- | GND | GND | PA-TX3+ | PA-TX3- | GND | GND | P1-SE0 |
2 | GND | GND | PA-RX2+ | PA-RX2- | GND | GND | PA-TX2+ | PA-TX2- | GND | |
3 | PA-RX1+ | PA-RX1- | GND | GND | PA-TX1+ | PA-TX1- | GND | GND | P1-SE1 | |
4 | GND | GND | PA-RX0+ | PA-RX0- | GND | GND | PA-TX0+ | PA-TX0- | GND | |
5 | C | PB-RX3+ | PB-RX3- | GND | GND | PB-TX3+ | PB-TX3- | GND | GND | P1-SE2 |
6 | GND | GND | PB-RX2+ | PB-RX2- | GND | GND | PB-TX2+ | PB-TX2- | GND | |
7 | PB-RX1+ | PB-RX1- | GND | GND | PB-TX1+ | PB-TX1- | GND | GND | P1-SE3 | |
8 | GND | GND | PB-RX0+ | PB-RX0- | GND | GND | PB-TX0+ | PB-TX0- | GND | |
9 | D | PC-RX3+ | PC-RX3- | GND | GND | PC-TX3+ | PC-TX3- | GND | GND | P1-SE4 |
10 | GND | GND | PC-RX0+ | PC-RX0- | GND | GND | PC-TX0+ | PC-TX0- | GND | |
11 | E | PC-RX1+ | PC-RX1- | GND | GND | PC-TX1+ | PC-TX1- | GND | GND | P1-SE5 |
12 | GND | GND | PC-RX0+ | PC-RX0- | GND | GND | PC-TX0+ | PC-TX0- | GND | |
13 | F | PD-RX1+ | PD-RX1- | GND | GND | PD-TX1+ | PD-TX1- | GND | GND | P1-SE6 |
14 | GND | GND | PD-RX0+ | PD-RX0- | GND | GND | PD-TX0+ | PD-TX0- | GND | |
15 | G | PD-RX1+ | PD-RX1- | GND | GND | PD-TX1+ | PD-TX1- | GND | GND | P1-SE7 |
16 | GND | GND | PD-RX0+ | PD-RX0- | GND | GND | PD-TX0+ | PD-TX0- | GND |
VITA 46.0 VPX
VITA 46.1 VMEbus Signal Mapping for VITA 46
VITA 46.3 Serial RapidIO on VITA 46
VITA 46.5 Hypertransport on VITA 46
VITA 46.9 XMC and PMC User I/O Mapping for VITA 46
VITA 46.10 Rear Transition Module for VITA 46
Related topics;
VPX J0 Pin outs
VPX Board Description
Topic Navigation: Interface Buses > Backplane Buses > VPX Card > VPX J1/P1 Pinout & Signal names.
Home | |||||||
Distributors | Components | Equipment | Software | Standards | Buses | Design | Reference |