RF Components and Modules
RF Component Manufacturers [section top]
RF Mixers;
Cougar Components Corp.
{RF Mixers, 50 ohms}
Crane Aerospace and Electronics
{Dual IF Double-Balanced Mixer, Double-Balanced Mixer, Starved LO Double-Balanced Mixer, Wireless Mixer Double Balanced Drop-In}
DAICO Industries, Inc.
{RF Mixers}
Hittite Microwave Corp.
{High IP3, SGL-END, I/Q Mixer/IRM, Down-converter, Sub Harmonic, 10 LO, DBL-BAL}
Marki Microwave Inc.
{Frequency mixers; IQ, IR/SSB, General Purpose, Broadband, High Intercept, Ultra Wideband Mixers}
Pulsar Microwave Corp.
{Connectorized Mixers, DC Coupled I.F., AC Coupled I.F., High IP, High Frequency}
Spectrum Microwave, Inc.
{RF Mixers with RF frequencies from 0.5 MHz to 26.5 GHz; double and triple balanced configurations}
MIL-DTL-28837 Radio Frequency Mixer Stages, General Specification
This is a listing of RF Mixer Manufacturers. The types of IC mixers are listed under the company name in alphabetic order. A mixer is an RF component or module that takes two input signals and produces an output signal which is the difference frequency. The input signals might be called the RF and the LO [Local Oscillator] which are then mixed to produce the IF [Intermediate Frequency] output. Modules might normally have SMA connectors as interfaces, while components would just use pins using any number of packages. The TO-8 package is in common usage. Frequency ranges could be in the MHz or GHz frequency ranges.
