LAN eXtensions for Instrumentation
|
LXI stands for LAN eXtensions for Instrumentation. LXI uses
Ethernet as the interconnect topology.
The LXI interface is a VXI like system
without a slot 0 controller and allows devices to interconnect via
Ethernet instead of an IEEE-488 cable. Modules are self-contained, with
their own power supply, processor, and LAN connections with no card cage,
but they may be rack-mounted. |
Agilent Technologies
{Function/Arbitrary Waveform Generator, Digital Multimeters, Signal Generators, LXI class A, LXI Switch and Control Instruments}
C&H Technologies, Inc.
{LXI Ethernet Carrier for M-Modules}
Pickering
{LXI High Voltage Matrix 2-pole 200x2, LXI Low Thermal EMF Matrix 1-pole 42x33,
LXI Microwave Matrix, 10GHz, Single 8x4, LXI WTB Probe, Terminated, LXI WTB 20m Cable Assembly}
VTI Instruments
{Data Acquisition and Signal Conditioning, Signal Switching and I/O}
LXI Based Products
In a few years most gear should contain the LXI interface.
When there is more gear with an LXI based interface the equipment will be moved to the Test Equipment pages.
However in the mean time as there so few LXI related products this page will stay.
It's already been out for 5 years [2005 - 2010], not sure why LXI is taking so long to be adapted.
Engineering Design Key words: LXI, LAN eXtensions for
Instrumentation, Test Equipment, General Purpose Interface Bus, Wiring Standard,
Military
Specification, Digital Interface for Programmable Instrumentation,
Connector, Physical, Mechanical, Size, LXI Components,
Type, Description, Vendors,
Products, Manufacturers, Plug, Receptacle, parallel cable interface, GPI
Bus, EIA568, EIA/TIA-568, CAT5.
|
|||||||
| Home | |||||||
|
|
|||||||
|
|
|
|
|
|
|
|
| Distributors | Components | Equipment | Software | Standards | Buses | Design | Reference |
Copyright © 1998 - 2010 All rights reserved Leroy Davis