Industrial Ethernet Connector Manufacturers

RJ (Modular Connector Jacks (female), Plugs (male)) types:
.. RJ11: Normal (1 pair) home phone jack, having 2, 4 to 6 pins. Tip (pin 2) and Ring (pin 3) reside on the 4 pin version.
.. RJ12: Has 3 pairs of pins: An RJ-11 using 3 pairs of wires
.. RJ14: Has 2 pairs of pins: 1 and 4, and 2 and 3. An RJ-11 using 1 pair of wires
.. RJ25: Has 3 pairs of pins: 1 and 6, 2 and 5, and 3 and 4.
.. RJ45: Has 4 pairs of pins. Used with RS232, 10BaseT, EIA568.
.. RJ48: Has 5 pairs of pins. Four voice circuits, used with T1/E1/ISDN.
M12, Circular M12 Industrial Ethernet Connector manufacturers

Amphenol
{Reinforced RJ 45 for industrial ethernet network applications}

Bulgin
{Push Pull Industrial Ethernet connector}

Harting
{Push Pull Industrial Ethernet connector based on RJ 45 w/ IDC connection}

Neutrik
{Industrial Ethernet connectors}

Phoenix Contact
{Push Pull Industrial Ethernet connector, RJ45}

Siemon
{5e/6 Waterproof/Harsh Environments}

Souriau
{UTP full plastic industrial circular Connectors}

Tyco
{sealed RJ-45 connector, Industrial Circular Ethernet connector. 5e}

-----------------------------------

Refer here for Commercial Ethernet Connector Manufacturers.

These industrial connectors may come with an Environmental Protection Rating, or Ingree Protection [IP].
The Definition of the Environmental Protection Rating is provided by the preceding link. The IP rating indicates protection from either water or dust.
Military connectors use military standards and specifications to rate their own connectors.
However, other than shells, and back-shells I don't believe they have a standard for Ethernet connectors.

A General listing of Industrial Ethernet Connector ManufacturersThe connector section is sub-divided into Audio Connector manufacturers, Card Edge, Connector manufacturers, Coax/Twinax Connector manufacturers, Cylindrical Connector manufacturers, D sub Connector manufacturers, DIN Connector manufacturers, Fiber Connector manufacturers, Headers Connector manufacturers, LVDS Connector manufacturers, Power Connector manufacturers, PWB to PWB Connector manufacturers, Military Connector manufacturers, Terminal Block Connector manufacturers, Jack-Plug Connector manufacturers, and Telecommunication Connector manufacturers. In addition connectors which are used for electronic Buses are listed on the following pages: PC-104 Connector manufacturers, PCI Connector manufacturers, SCSI Connector manufacturers, USB Connector manufacturers, VME Connector manufacturers, Compact-PCI Connector manufacturers, PCMCIA Connector manufacturers, 2mm Connector manufacturers, FireWire Connector manufacturers, Smart Card Connector manufacturers, and Un-categorized Connector manufacturers. The products the companies produced are listed under the company name which are indexed in alphabetic order.

{Industrial Ethernet Connector Manufacturer Index}


Home


Distributors	Components	Equipment	Software	Standards	Buses	Design	Reference