Mezzanine boards are small form factor cards designed to plug onto larger form factor boards. The larger main boards can be designed to support one or more Mezzanine boards. However not all mezzanine formats are supported by the main boards. These reduced form factor cards are designed to allow programmable or changeable functions to the carrier cards.
Advanced Mezzanine Card Board Description 72mm x 185mm
..... Advanced Mezzanine Card Board Manufacturers listing
AMC Board Description 72mm x 185mm
..... AMC Board Manufacturers listing
CMC Description
..... Mechanical definition, many card formats
Common Mezzanine Card Description
EMC Board Description 73.5mm x 140.3mm
Express Mezzanine Card Description listing
Switched Mezzanine Card Description listing
XMC Board Description 74mm x 149mm
VME Boards [Requires a VME back plane, 3U, 6U, or 9U CCAs]
VXI Boards [Requires a VXI back plane, 3U, 6U, or 9U PWBs]
Equipment Chassis Manufacturers [Any card format]
Standard/Embedded MotherBoard Form Factors [Board sizes and Socket types]
BackPlane Manufacturers
Modules; Programmable Logic Controller
Board sizes listed are approximate, review the standards to obtain the correct board size.
These board formats may be used as a Stand-alone computer, or may require a backplane or mother board.
The page links point to manufacturers, interface bus descriptions and board sizes. If you don't find a particular board format listed above, try the Buses icon below.
