Additional Chassis Component Manufacturers and Vendors
Anti-Vibration Product Manufacturers
Cable Clamp Manufacturers
Cable clamps are normally plastic rings open at one end with a screw hole to secure the cable to a surface.
Heat Shrink Manufacturers
Heat Shrinkable tubing used to insulate the conductive portion of a wire to connector connection.
Leveling Product Manufacturers
Adjustable feet for a table mounted chassis is one example.
Strain Relief Manufacturers
Strain Reliefs are used to secure a cable to a chassis, for example, so that if a force is applied to the cable the wires are not pulled from the interfacing connector.
Grommet Manufacturers
Grommets are rubber rings which are inserted in chassis holes to protect a cable running through the hole, for example.
Bumpon Manufacturers
Bumpons are small plastic stick-on bumps used to protect a surface.
----------------------------
Oil Tight Plugs: used to seal unused pushbutton holes, conduit openings and knockout holes against dust, oil and water.
Clip Nuts: to attach the chassis to a standard size rack, 10-32
Lock Kits: used to secure the front panel door to the chassis, assuming the chassis uses a panel door.
Lift or Pull Handles: so the chassis can be pulled out of a rack or lifted to another location.
Next Topic; Captive Screws
How To Specify a Equipment Chassis; Index page
