Hardware
Mechanical Components
Chassis and Case Manufacturers
[General]
[cPCI]
[VME]
[
VXI] [ATR]
[PC]
[ATCA]
[Equipment Rack
Manufacturers] [BackPlane Manufacturers]
[Transport
Cases] [Fan Trays]
[Equipment Enclosure Accessories]
[Home]
A general listing of manufacturers that produce Accessories for
Equipment Enclosures and Chassis. The types of products or
equipment they produce are listed under the company name, in alphabetic
order. There are a number of terms, which all mean the same thing, used
to describe an electronic enclosure which hold circuit cards: Case,
Chassis, Crate, Mainframe, and Enclosure. The enclosures may also be
sub-divided into Rack-Mount, Wall-mount, Tower, or table-top; Commercial,
Industrial, Rugged, or Military. A Sub-rack is not a complete electronic
enclosure and may only include a metal frame and a card cage. A Card Cage
has no enclosure at all and is just a frame [with card guides] to support
the particular CCA form factor used.
If the Chassis is produced for a particular card form factor, for example
cPCI, then you can also check that
particular BUS page for more data or the
COTS card vendors page for a listing of
CCA manufacturers.
APW {CompactPCI Accessories-VME/VXI Extender cards/Front Panels/Air
Divertor/Blanks}
Comm Con Connectors Inc. {cPCI gear}
ECS Composites
Gompf Brackets Inc. {3U, 6U, 9U CompactPCI/VME front panels-PMC bezels-Faceplates-PCI/ISA
Card Brackets}
Kaparel Corporation {Panels/Handles for AdvancedTCA, cPCI, VME. Face Plates, Keying, Air Flow
Blockers}
Knurr USA Inc. {cPCI Back Planes}
One Stop Systems Inc. {3U/6U High 4HP/8HP/12HP wide Face Plates, 3U/6U Filler Panels, Drive
mounting bracket, Airflow Baffle}
Phillips
Components {PMC Bezels}
Richro {Inserter/Ejector, Cable Management, Fiber Management}
Systems Integration Plus Inc.
Unitrackind {Card Ejectors and Pulls Manufacturer}
Virginia Panel Corporation {Mass InterConnects}
Chassis Parts; captive hardware, captive screw, Dust cap, Safety Chain, card guides, Keying strips, ESD card guide contact, Terminals, Fuse holder, slide rails, ground lug, Handles, Air-Flow Blocker
Electronic Equipment Rack Standards
EIA-310-D Cabinets, Racks, Panels, and Associated Equipment
IEC 60297-1 Mechanics for Racks - 19 inch common standard
(DIN41494}
IEC 297-x Dimensions of Panels and Racks
MIL-STD-901D SHOCK TESTS. H.I. (HIGH-IMPACT)
SHIPBOARD MACHINERY, EQUIPMENT, AND SYSTEMS, REQUIREMENTS FOR
[Shock]
MIL-STD-167-1 MECHANICAL VIBRATIONS OF SHIPBOARD EQUIPMENT (TYPE 1
- ENVIRONMENTAL AND TYPE II - INTERNALLY EXCITED) [Vibration]
MIL-STD-5400 ELECTRONIC EQUIPMENT, AEROSPACE, GENERAL
SPECIFICATION FOR [See MIL-HDBK-5400]
MIL-STD-810E ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND
LABORATORY TESTS [Humidity]
MIL-STD-46IE REQUIREMENTS FOR THE CONTROL OF ELECTROMAGNETIC
INTERFERENCE CHARACTERISTICS OF SUBSYSTEMS AND EQUIPMENT [EMI/EMC]
MIL-STD-462 Measurement of Electromagnetic Interference
Characteristics of Subsystems and Equipment [EMI/EMC]
MIL-STD-704F AIRCRAFT ELECTRIC POWER CHARACTERISTICS
MIL-STD-1275B CHARACTERISTICS OF 28 VOLT DC ELECTRICAL SYSTEMS IN
MILITARY VEHICLES
MIL-A-8625A - Anodic Coatings for Aluminum and Aluminum
Alloys
MIL-C-5541E - Chemical Conversion Coatings for Aluminum and
Aluminum Alloys
Chassis Height is also given in 'U', 1U = 44.45mm,
2U = 88.90mm, and so on.
Chassis Width may be given in 'HP', 1HP = 5.08mm
(0.2in). HP ~ Horizontal Pitch.
Board Keying Manufacturers, Chassis Leveling Products, Card Guide Manufacturers
{Back to Electronic Equipment Enclosure and Chassis Manufacturers Index}
Electronic Engineering Key Words: Case, Chassis, Crate, Mainframe, Enclosure, VME, VXI, Rugged, 8U, Slot, shelf, Conduction, Cooled, Mobile, VME Bus, VMEbus, Conduction-cooled, Electronic equipment, Shock, vibration, isolated, PCI, VME64, shielded, Enclosures, Custom, cPCI, Aluminum, CompactPCI, EMI, COTS, manufacturers, Vendors, Flight Products, Flight Cases, Table-top, Rack-Mount, Aluminum Electronic enclosures, Electronics.
|
|||||||
| Home | |||||||
|
|
|||||||
|
|
|
|
|
|
|
|
| Distributors | Components | Equipment | Software | Standards | Buses | Design | Reference |