COTS MicroTCA Card Manufacturers and OEM Board Manufacturers. Micro TCA Board Supplies

Hardware
OEM Equipment
COTS MicroTCA Card Manufacturers

[ATCA] [COM] [cPCI Express] [Compact PCI] [cPCI Express] [DIMM-PC] [ESB]
[Mezzanine] [MicroTCA] [PC-104] [PC-AT] [PISA] [PCIe] [PCMCIA] [PCI]
[STD32] [VME] [VXI] [No-Format] [Chassis & Cases] [BackPlanes & MotherBoards]
[Home]

This is a listing of COTS [Commercial-Off-The-Self] MicroTCA Card manufacturers. The types of products or devices the manufacturers produce are listed under the company name, in alphabetic order. In addition to functional cards; Protoboards, Prototyping Cards, Extender cards, adapters and Prototyping board manufacturers are also listed below. Extender boards may be either Passive [straight through] or Active [buffered signals].

MicroTCA Board Manufacturers [Micro Telcom Computing Architecture]

MicroTCA card manufacturers links are provided below. The MicroTCA bus description may be found on the MicroTCA Design page which provides information and additional MicroTCA OEM manufacturing links for IC's and connectors.

The MicroTCA specification was just released as a standard in July 2006. There are at least three board types used in the MicroTCA standard; the AMC board, Power modules, and a backplane.

This page lists MicroTCA Backplane manufacturers. AMC boards are listed on their own page.
A case or MicroTCA Chassis are also listed on their own page.

{MicroTCA Backplanes - Star} Elma Bustronic

The MicroTCA standard uses the Advanced Mezzanine Card format as the plug-in processor and I/O format card.
The following page lists manufacturers of AMC Mezzanine Cards

As discussed, a MicroTCA board is either a small form factor card that requires a backplane, or used as a mezzanine card with a base-board. This topic covers the manufacturers of backplanes that would accept an AMC card, and requiring no main-board or base-board to support the AMC card. The description of the AMC Mezzanine Card is covered on a page separate from the page that covers AMC Card Manufacturers. The vendors page also only covers the actual mezzanine board and not the backplane which is covered here. As many engineers might be looking to procure a mezzanine card, but very few wanting to purchase a backplane. Most designers would purchase a MicroTCA chassis with a pre-installed backplane, and only a small percentage would attempt a custom design of an equipment chassis.

A General listing of COTS [Commercial-Off-The-Shelf] MicroTCA Card Manufacturers and Related sites. Also Chassis and Case manufacturers, or BackPlanes and MotherBoard manufacturers also have a link at the top of the page. The products the companies produced are listed under the company name which are indexed in alphabetic order. In addition to functional cards, Prototyping Boards, Prototyping Cards, and Active/Passive Extender Board Manufacturers are also listed above.


Home


Distributors	Components	Equipment	Software	Standards	Buses	Design	Reference