ATR chassis, rack mount

Hardware
Mechanical Components

ATR Chassis Manufacturers


[General] [cPCI] [VME] [ VXI] [ATR] [PC] [ATCA]
[Equipment Rack Manufacturers] [BackPlane Manufacturers]
[Transport Cases] [Fan Trays]
[ Equipment Enclosure Accessories]
[Home]

This is a listing of ATR Chassis manufacturers. The types of products or equipment they produce are listed under the company name, in alphabetic order. Additional Equipment Enclosures have links above. The enclosures may also be sub-divided into Rack-Mount, Wall-mount, Tower, or table-top; Commercial, Industrial, Rugged, or Military. A Sub-rack is not a complete electronic enclosure and may only include a metal frame and a card cage. A Card Cage has no enclosure at all and is just a frame [with card guides] to support the particular CCA form factor used.

ATR Avionics Chassis {Air Transport Rack, Military}

MIL_PRF_85726B;.....Enclosure, Standard Avionics, Forced Air-Cooled, Specification for



----------------------

Aitech Defense Systems Inc.
{1/2 Slot, 3/4 Slot, Full Slot ATR VME Enclosures MIL [Military]/Rugged, conduction cooled}

American Rugged Enclosures 'ARE'
{SEM E, Conduction Cooled ATR Chassis, 3 - 21 Slots}

CM Computer
{5/7/12 Slot ATR chassis supporting VME32 and VME64x backplanes, 1/2, 3/4, 1 ATR Long size}

Curtiss Wright
{5/7/12 Slot 6U VME ATR Avionics Chassis; 1/2 ATR Short-Long/Tall, 3/4 ATR Long Tall, 1 ATR Short-Long/Tall}

Kontron
{3/4ATR 6U VME64x boards, a IEEE1101-compliant convection-cooled board backplane with P0 connectors}

MacroLink Inc.
{Rugged ATR VMEbus, CompactPCI and SCSI enclosures. Convection, conduction and liquid cooled models.
Also Brazed aluminum construction}




ATR Chassis Form Factor:

1/2-ATR short VME enclosure; 5 backplane slots.
3/4-ATR short VME enclosure; 8 backplane slots.
Full-ATR short VME enclosure; 15 backplane slots.

Chassis Cooling:
Natural Convection
Cold plate
Cold plate or forced-air

Card Cooling:
Boards are conduction-cooled or Liquid Cooled

Electronic ATR Equipment Chassis Standards

MIL-STD-901D SHOCK TESTS. H.I. (HIGH-IMPACT) SHIPBOARD MACHINERY, EQUIPMENT, AND SYSTEMS, REQUIREMENTS FOR [Shock]
MIL-STD-167-1 MECHANICAL VIBRATIONS OF SHIPBOARD EQUIPMENT (TYPE 1 - ENVIRONMENTAL AND TYPE II - INTERNALLY EXCITED) [Vibration]
MIL-STD-5400 ELECTRONIC EQUIPMENT, AEROSPACE, GENERAL SPECIFICATION FOR [See MIL-HDBK-5400]
MIL-STD-810E ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS [Humidity]
MIL-STD-46IE REQUIREMENTS FOR THE CONTROL OF ELECTROMAGNETIC INTERFERENCE CHARACTERISTICS OF SUBSYSTEMS AND EQUIPMENT [EMI/EMC]
MIL-STD-462 Measurement of Electromagnetic Interference Characteristics of Subsystems and Equipment [EMI/EMC]
MIL-STD-704F AIRCRAFT ELECTRIC POWER CHARACTERISTICS
MIL-STD-1275B CHARACTERISTICS OF 28 VOLT DC ELECTRICAL SYSTEMS IN MILITARY VEHICLES
MIL-A-8625A - Anodic Coatings for Aluminum and Aluminum Alloys
MIL-C-5541E - Chemical Conversion Coatings for Aluminum and Aluminum Alloys

Chassis Height is provided in 'U', 1U = 44.45mm, 2U = 88.90mm, and so on.
Chassis Width may be in 'HP', 1HP = 5.08mm (0.2in). HP ~ Horizontal Pitch.

A Guide to writing Chassis Specs for Vendors; How to spec out a chassis {Custom Chassis design and how to define the chassis for vendors}
The section covers a number of topics related to an ATR chassis, including
Chassis grounding, Military specifications, Heat Transfer, Power supplies and a number of other issues.





This is a listing of and ATR Chassis manufacturers. The types of products or equipment they produce are listed under the company name, in alphabetic order. There are a number of terms, which all mean the same thing, used to describe an electronic enclosure which hold circuit cards: Case, Chassis, Crate, Mainframe, and Enclosure. The enclosures may also be sub-divided into Rack-Mount, Wall-mount, Tower, or table-top; Commercial, Industrial, Rugged, or Military. A Sub-rack is not a complete electronic enclosure and may only include a metal frame and a card cage. A Card Cage has no enclosure at all and is just a frame [with card guides] to support the particular CCA form factor used.
Additional electronic Equipment manufacturers may be found by selecting the OEM Equipment icon below.

{Electronic Equipment ATR Chassis Manufacturers top}


Larry's Web Page
Home

Electronic Parts and Equipment Distributors Electronic Component Manufacturers OEM Electronic Equipment Manufacturers EDA Software Producers CAD/CAE Software Engineering Standards, EE Publications Interface/Embedded Computer Bus Electronic Engineering Design Data Engineering Reference Information.
DistributorsComponents Equipment Software Standards Buses Design Reference

Modified 7/18/2015
Copyright © 1998 - 2016 All rights reserved Larry Davis